informatique:linux:materiel:imprimante-ricoh-sp-c252sf-ps

Imprimante Ricoh SP C252DN

Nom de la section

Un fichier PPD est un descripteur qui contient des informations sur les fonctionnalités de l'imprimante, telles que les résolutions d'impression disponibles, les options de finition et les polices de caractères disponibles. Les systèmes d'exploitation, y compris Linux, utilisent les informations contenues dans le PPD pour configurer l'imprimante et fournir des options d'impression avancées.

Pour utiliser un PPD sous Linux, vous devez tout d'abord installer le pilote d'imprimante correspondant à votre imprimante.

Pour l'imprimante Ricoh SP C252DN sélectionner le protocole JetDirect.

Choisir le pilote Generic > Generic PDF Printer

Sur le site https://www.openprinting.org/printer/Ricoh/Ricoh-SP_C252DN télécharger le fichier PPD file en cliquant sur directly download PPD.

Dans la liste des imprimantes, sélectionner le symbole Paramètre (roue crantée) puis sélectionner Informations sur l'imprimante :

Cliquer sur le bouton Installer le fichier PPD. Choisir le fichier fraîchement téléchargé. Changer le nom, renseigner l'emplacement.

Fermer avec la croix.

Une fois le pilote installé, vous pouvez sélectionner l'imprimante dans les options d'impression de votre application, puis sélectionner les options d'impression disponibles.

En résumé, si vous disposez d'un pilote d'imprimante Linux compatible avec votre imprimante qui inclut le PPD approprié, vous pouvez utiliser le PPD pour configurer votre imprimante et profiter de toutes les fonctionnalités avancées qu'elle offre.

Reprogrammation de la puce de toner

Port de communication

// This code updates Ricoh Toner chip for Ricoh Aficio SP C250SF, SP C250DN, C250e, etc...
// Update EEPROM_I2C_ADDRESS define value with the chip you want to reprogram
// 83 is Chip K - black
// 82 is Chip C - cyan
// 81 is Chip M - magenta
// 80 is Chip Y - yellow

#define EEPROM_I2C_ADDRESS 83
#include <Wire.h>

// blank data for K, C, M & Y chip. 128 array of data. I got it from data dump of a replacement chip. 
byte KChipData[]={168,0,1,3,18,1,1,255,100,0,52,48,55,53,52,51,20,9,65,66,22,0,22,38,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,100,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0};
byte CChipData[]={168,0,1,3,14,2,1,255,100,0,49,49,49,53,52,54,20,2,65,66,23,0,7,1,255,255,255,255,255,255,255,255,88,48,56,54,80,52,48,49,50,48,56,0,68,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,1,85,0,18,0,40,0,5,184,230,50,0,128,0,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0};
byte MChipData[]={168,0,1,3,14,3,1,255,100,0,49,49,49,53,52,54,20,2,65,66,24,0,7,16,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,100,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0};
byte YChipData[]={168,0,1,3,14,4,1,255,100,0,49,49,49,53,52,55,20,2,65,66,25,0,3,7,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,100,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0};

void setup() {
  // Select correct data for chip then copy to WriteData array
  byte WriteData[128];
  switch (EEPROM_I2C_ADDRESS){
    case 83:
      memcpy(WriteData,KChipData,128*sizeof(byte));
      break;
    case 82:
      memcpy(WriteData,CChipData,128*sizeof(byte));
      break; 
    case 81:
      memcpy(WriteData,MChipData,128*sizeof(byte));
      break;
    case 80:
      memcpy(WriteData,YChipData,128*sizeof(byte));
      break;
    default: //default K chip data, no reason.
      memcpy(WriteData,KChipData,128*sizeof(byte));
      break;
  }
  
  // Start Wire and Serial bus
  Wire.begin();
  Serial.begin(9600);
  delay(100);

  Serial.println("Start");
  Serial.println(" ");

  // Start Write Chip with blank data
  Serial.println("Write 128 bytes:");
  byte wordaddress;

  for(byte i=0;i<128;i++){
        wordaddress = i;
        i2cwrite((byte)wordaddress,(byte)WriteData[i]);
        Serial.print(wordaddress);
        Serial.print(":");
        Serial.print(WriteData[i]);
        Serial.print(" ");
  }

  // Start Read chip
  Serial.println(" ");
  Serial.println("Read 128 bytes:");
  for(byte i=0;i<128;i++){
      byte readVale = i2cread(i);
      Serial.print(i);
      Serial.print(":");
      Serial.print(readVale);
      Serial.print(" ");
  } 
  Serial.println(" ");  
  Serial.println("End");

}

void loop() {

}

void i2cwrite(byte address, byte data) {
  Wire.beginTransmission(EEPROM_I2C_ADDRESS);
  Wire.write((byte)address);
  Wire.write((byte)data);
  Wire.endTransmission();
  delay(20);
}

byte i2cread(byte address) {
  byte rData = 0;
  Wire.beginTransmission(EEPROM_I2C_ADDRESS);
  Wire.write((byte)address);
  Wire.endTransmission();

  Wire.requestFrom(EEPROM_I2C_ADDRESS,1);
  while (Wire.available()){
    rData = Wire.read();
    return rData;
  }
}

void WhatI2CAddress() {
    for(int i=0;i<128;i++){
      Wire.requestFrom(i,1);  //request first data byte
      Serial.print(i);
      Serial.print(":");
      while(Wire.available()){
        byte c = Wire.read();
        Serial.print(c);      //if data exist, print it out. That way you can identify which address.
      }
      Serial.println(" ");
      delay(5);
  }
}

  • informatique/linux/materiel/imprimante-ricoh-sp-c252sf-ps.txt
  • Dernière modification : 2023/09/19 23:04
  • de Cédric ABONNEL